Victorian Custom Painting (Primrose Homes)
November 2008
         
   

     

  • Newly built custom home
  • Tape, paper and plastic all windows, doors and flooring
  • Vacuum perimeter of all floors at walls
  • Spray one coat sherwin Williams flat paint on all walls
  • Sand all walls after first coat
  • Spray two coats Sherwin Williams flat white on all ceilings
  • Putty all nail holes and sand all trim
  • Caulk all seams and joints in trim
  • Spray one coat primer on all bare wood trim
  • Sand all trim between coats
  • Spray two coats Sherwin Williams Superpaint semi-gloss dover white on all trim and doors
  • Stain all stainable wood surfaces to match cabinets at customers request
  • Spray two coats lacquer sealer on stained areas excluding stairs
  • Sand all stained wood areas
  • Putty all nail holes in stained wood areas with custom color matched putty
  • Spray two final coats Lacquer semi gloss on stained wood areas excluding stairs
  • Apply three coats Polyurethane on stairs and bar top sanding between coats
  • Apply final coat Sherwin Williams flat on all walls

 

   
Bar
 
Bar Ceiling
 
Bar From Stairs
   
Den Lacquered Ceiling, Panel and Trim
 
Den and Hall
 
Den Windows and Raise Panel
   
Den Wagon Wheel Ceiling
 
Dining Room All Custom Trim
 
Dining Room
   
Entry
 
Stairwell
 
Second Floor Hall
   
Theater
 
Basement
 
Mud Room Built-In
   
Kitchen
 
Kitchen Ceiling Island to Match Cabinets
 
Kitchen Sitting Area
   
Master Bedroom
 
Master Bedroom Ceiling Cathedral
 
Master Bedroom Ceiling and Crown Molding
   
Master Bedroom Crown Molding
 
Master Bathroom Cathedral
 
Master Bathroom
   
Family Room Mantel and Raised Panel
 
Family Room Built In
 
Family Room View From Hall
       
   
Family Room Crawford Ceiling